P
E
C
OWER OVER
THERNET
OMMANDS
-
SHOW POWER
INLINE
Table 1: Parameters in the show power-inline command output (cont.)
Related
show power-inline counters
Commands
show power-inline interface
C613-50102-01 REV C
Parameter
Class
Max (mW)
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
The class of the connected PD, if power is being supplied to
the PD.
The power in milliwatts (mW) allocated for the PoE port.
Additionally, note the following as displayed per PoE port:
• [U] if the power limit for a port was user configured (with
the
power-inline max
• [L] if the power limit for a port was supplied by LLDP.
• [C] if the power limit for a port was supplied by the PD
class.
command).
662