Log Monitor (Filter) - Allied Telesis AT-x510-28GTX Command Reference Manual

Stackable gigabit edge switches
Hide thumbs Also See for AT-x510-28GTX:
Table of Contents

Advertisement

L
C
OGGING
OMMANDS
(
)
LOG MONITOR
FILTER

log monitor (filter)

Overview
This command creates a filter to select messages to be sent to the terminal when
the
priority/severity of the message, the program that generated the message, the
logging facility used, a sub-string within the message or a combination of some or
all of these.
log monitor [level <level>] [program <program-name>] [facility
Syntax
<facility>] [msgtext <text-string>]
no log monitor [level <level>] [program <program-name>]
[facility <facility>] [msgtext <text-string>]
Parameter
Description
level
Filter messages by severity level.
<level>
The minimum severity of message to send. The level can be specified as one of the following
numbers or level names, where 0 is the highest severity and 7 is the lowest severity:
0|emergencies
1|alerts
2|critical
3|errors
4|warnings
5|notices
6|informational
7|debugging
program
Filter messages by program. Include messages from a specified program.
<program-
The name of a program to log messages from, either one of the following predefined program
name>
names (not case-sensitive), or another program name (case-sensitive) that you find in the log
output:
rip
ripng
ospf
ospfv3
rsvp
pim-dm
pim-sm
pim-smv6
dot1x
C613-50102-01 REV C
terminal monitor
command is given. Selection can be based on the
System is unusable
Action must be taken immediately
Critical conditions
Error conditions
Warning conditions
Normal, but significant, conditions
Informational messages
Debug-level messages
Routing Information Protocol (RIP)
Routing Information Protocol - next generation (RIPng)
Open Shortest Path First (OSPF)
Open Shortest Path First (OSPF) version 3 (OSPFv3)
Resource Reservation Protocol (RSVP)
Protocol Independent Multicast - Dense Mode (PIM-DM)
Protocol Independent Multicast - Sparse Mode (PIM-SM)
PIM-SM version 6 (PIM-SMv6)
IEEE 802.1X Port-Based Access Control
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
359

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents