Telnet - Allied Telesis AT-x510-28GTX Command Reference Manual

U A C
SER CCESS OMMANDS

TELNET

telnet
Overview Use this command to open a telnet session to a remote device.
telnet {<hostname>|[ip] <ipv4-addr>|[ipv6] <ipv6-addr>}
Syntax
[<port>]
Mode User Exec and Privileged Exec
Examples To connect to TCP port 2602 on the device at 10.2.2.2, use the command:
awplus#
To connect to the telnet server host.example, use the command:
awplus#
To connect to the telnet server host.example on TCP port 100, use the
command:
awplus#
C613-50102-01 REV C
Parameter Description
<hostname>
The host name of the remote system.
ip
Keyword used to specify the IPv4 address or host name of a remote
system.
<ipv4-addr>
An IPv4 address of the remote system.
ipv6
Keyword used to specify the IPv6 address of a remote system
<ipv6-addr> Placeholder for an IPv6 address in the format x:x::x:x, for
example, 2001:db8::8a2e:7334
<port>
Specify a TCP port number (well known ports are in the range 1-
1023, registered ports are 1024-49151, and private ports are 49152-
65535).
telnet 10.2.2.2 2602
telnet host.example
telnet host.example 100
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
187