Show Memory History - Allied Telesis AT-x510-28GTX Command Reference Manual

S C M
YSTEM ONFIGURATION AND

SHOW MEMORY HISTORY

show memory history
Overview This command prints a graph showing the historical memory usage.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show memory history [<stack-ID>]
Mode User Exec and Privileged Exec
Usage This command's output displays three graphs of the percentage memory
utilization:
•
•
•
Examples To show a graph displaying the historical memory usage for either a single
unstacked device, or a complete stack, use the command:
awplus#
To show a graph displaying the historical memory usage for specific stack member
(stack member 2 in this example) within a stack, use the command:
awplus#
C613-50102-01 REV C
C
ONITORING OMMANDS
Parameter
<stack-ID>
per second for the last minute, then
per minute for the last hour, then
per 30 minutes for the last 30 hours.
show memory history
show memory history 2
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Stack member number, from 1 to 8.
"Getting Started
Guide.
263