Log Buffered (Filter) - Allied Telesis AT-x510-28GTX Command Reference Manual

L C
OGGING OMMANDS
( )
LOG BUFFERED FILTER

log buffered (filter)

Overview Use this command to create a filter to select messages to be sent to the buffered
log. Selection can be based on the priority/ severity of the message, the program
that generated the message, the logging facility used, a sub-string within the
message or a combination of some or all of these.
The no variant of this command removes the corresponding filter, so that the
specified messages are no longer sent to the buffered log.
log buffered [level <level>] [program <program-name>] [facility
Syntax
<facility>] [msgtext <text-string>]
no log buffered [level <level>] [program <program-name>]
[facility <facility>] [msgtext <text-string>]
Parameter Description
level
Filter messages to the buffered log by severity level.
<level>
The minimum severity of message to send to the buffered log. The level can be specified as
one of the following numbers or level names, where 0 is the highest severity and 7 is the
lowest severity:
0|emergencies
1|alerts
2|critical
3|errors
4|warnings
5|notices
6|informational
7|debugging
program
Filter messages to the buffered log by program. Include messages from a specified program in
the buffered log.
<program-
The name of a program to log messages from, either one of the following predefined program
name>
names (not case-sensitive), or another program name (case-sensitive) that you find in the log
output:
rip
ripng
ospf
ospfv3
rsvp
pim-dm
pim-sm
C613-50102-01 REV C
System is unusable
Action must be taken immediately
Critical conditions
Error conditions
Warning conditions
Normal, but significant, conditions
Informational messages
Debug-level messages
Routing Information Protocol (RIP)
Routing Information Protocol - next generation (RIPng)
Open Shortest Path First (OSPF)
Open Shortest Path First (OSPF) version 3 (OSPFv3)
Resource Reservation Protocol (RSVP)
Protocol Independent Multicast - Dense Mode (PIM-DM)
Protocol Independent Multicast - Sparse Mode (PIM-SM)
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
323