Vlan Mode Remote-Mirror-Vlan - Allied Telesis AT-x510-28GTX Command Reference Manual

Stackable gigabit edge switches
Hide thumbs Also See for AT-x510-28GTX:
Table of Contents

Advertisement

P
M
R
ORT
IRRORING AND
EMOTE
-
-
VLAN MODE REMOTE
MIRROR
VLAN

vlan mode remote-mirror-vlan

Overview
Use this command to create a single VLAN or a range of VLANs in remote mirror
mode to be used for remote mirroring.
Use the no variant of this command to remove the remote mirror VLAN from the
VLAN database and its configurations.
Syntax
vlan [<vid>|<vid-range>] mode remote-mirror-vlan
no vlan [<vid>|<vid-range>]
Default
There is no remote mirror VLAN by default.
Mode
VLAN Configuration
Usage
This remote mirror VLAN needs to be configured on the remote mirroring source
device, the destination (receiving) device, and any devices in between that are to
forward the mirrored traffic. We recommend configuring this on the receiving
device and intermediate devices before configuring the source device.
The remote mirror VLAN operates in a special mode— all traffic on the remote
mirror VLAN is flooded, and no learning or CPU processing is done for packets in
the VLAN. BPDU packets (link-local packets used to control features like spanning
tree or AMF) are dropped on remote mirror VLANs.
Disabling the remote-mirroring VLAN on the source switch does not prevent the
mirrored packets from being sent with the remote-mirror VLAN tag. To stop the
mirroring, the command no remote-mirror interface must be used.
Example
To create a VLAN with VLAN ID 3 in remote mirror VLAN mode, use the commands:
awplus#
awplus(config)#
awplus(config-vlan)#
To remove the remote mirror VLAN with ID 3, use the commands:
awplus#
awplus(config)#
awplus(config-vlan)#
Related
remote-mirror interface
Commands
show remote-mirror
C613-50102-01 REV C
M
C
IRRORING
OMMANDS
Parameter
Description
<vid>
The VLAN ID of the remote mirroring VLAN to be created.
<vid-range>
The range of VLAN IDs for the remote mirroring VLANs to be
created.
configure terminal
vlan database
configure terminal
vlan database
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
vlan 3 mode remote-mirror-vlan
no vlan 3
416

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents