Show Debugging Ip Dns Forwarding - Allied Telesis AT-x510-28GTX Command Reference Manual

D N S (DNS) C
OMAIN AME ERVICE

SHOW DEBUGGING IP DNS FORWARDING

show debugging ip dns forwarding
Overview Use this command to display the DNS Relay debugging status. DNS Relay
debugging is set using the debug ip dns forwarding command.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show debugging ip dns forwarding
Mode User Exec and Privileged Exec
Example To display the DNS Relay debugging status, use the command:
awplus#
Output Figure 21-1: Example output from the show debugging ip dns forwarding
Related debug ip dns forwarding
Commands
C613-50102-01 REV C
OMMANDS
show debugging ip dns forwarding
command
awplus#show debugging ip dns forwarding

DNS Relay debugging status:
debugging is on
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
753