Allied Telesis AT-x510-28GTX Command Reference Manual page 767

IP 6 C
V OMMANDS
6
IPV ADDRESS AUTOCONFIG
To disable SLAAC on the VLAN interface vlan2, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ipv6 address
Commands
ipv6 enable
show ipv6 interface brief
show ipv6 route
show running-config
C613-50102-01 REV C
configure terminal
interface vlan2
no ipv6 address autoconfig
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
767