Show Spanning-Tree Mst - Allied Telesis AT-x510-28GTX Command Reference Manual

S T C
PANNING REE OMMANDS
-
SHOW SPANNING TREE MST

show spanning-tree mst

Overview This command displays bridge-level information about the CIST and VLAN to MSTI
mappings.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show spanning-tree mst
Mode User Exec, Privileged Exec and Interface Configuration
Example To display bridge-level information about the CIST and VLAN to MSTI mappings,
enter the command:
awplus#
Output Figure 16-5: Example output from show spanning-tree mst
Related show spanning-tree mst interface
Commands
C613-50102-01 REV C
show spanning-tree mst
% 1: Bridge up - Spanning Tree Enabled
% 1: CIST Root Path Cost 0 - CIST Root Port 0 - CIST Bridge 
Priority 32768
% 1: Forward Delay 15 - Hello Time 2 - Max Age 20 - Max-hops 20
% 1: CIST Root Id 8000000475e93ffe
% 1: CIST Reg Root Id 8000000475e93ffe
% 1: CST Bridge Id 8000000475e93ffe
% 1: portfast bpdu-filter disabled
% 1: portfast bpdu-guard disabled
% 1: portfast errdisable timeout disabled
% 1: portfast errdisable timeout interval 300 sec
%
% Instance
% 0:
% 2:
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
VLAN
1
4
"Getting Started
Guide.
562