Allied Telesis AT-x510-28GTX Command Reference Manual page 340

L C
OGGING OMMANDS
( )
LOG EMAIL FILTER
Examples To create a filter to send all messages generated by EPSR that have a severity of
notices or higher to the email address admin@homebase.com, use the following
commands:
awplus#
awplus(config)#
program epsr
To create a filter to send all messages containing the text "Bridging initialization",
to the email address admin@homebase.com, use the following commands:
awplus#
awplus(config)#
initialization"
To create a filter to send messages with a severity level of informational and
above to the email address admin@alliedtelesis.com, use the following
commands:
awplus#
awplus(config)#
informational
To stop the device emailing log messages emailed to the email address
admin@alliedtelesis.com, use the following commands:
awplus#
awplus(config)#
To remove a filter that sends all messages generated by EPSR that have a severity
of notices or higher to the email address admin@homebase.com, use the
following commands:
awplus#
awplus(config)#
program epsr
To remove a filter that sends messages with a severity level of informational and
above to the email address admin@alliedtelesis.com, use the following
commands:
awplus#
awplus(config)#
informational
Related default log email
Commands
log email
log email exclude
log email time
show log config
C613-50102-01 REV C
configure terminal
log email admin@homebase.com level notices
configure terminal
log email admin@homebase.com msgtext "Bridging
configure terminal
log email admin@alliedtelesis.com level
configure terminal
no log email admin@homebase.com
configure terminal
no log email admin@homebase.com level notices
configure terminal
no log email admin@alliedtelesis.com level
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
340