Clear Test Interface - Allied Telesis AT-x510-28GTX Command Reference Manual

I T C
NTERFACE ESTING OMMANDS

CLEAR TEST INTERFACE

clear test interface
Overview This command clears test results and counters after issuing a test interface
command. Test results and counters must be cleared to issue subsequent test
interface commands later on.
clear test interface {<port-list>|all}
Syntax
Mode Privileged Exec
To clear the counters for port1.0.1 use the command:
Examples
awplus#
To clear the counters for all interfaces use the command:
awplus#
Related test interface
Commands
C613-50102-01 REV C
Parameter Description
<port-list> The ports to test. A port-list can be:
• a switch port (e.g. port1.0.6)
• a continuous range of ports separated by a hyphen, e.g.
port1.0.1-port1.0.6
• a comma-separated list of the above, e.g.
port1.0.1,port1.0.5-1.0.6
The specified ports must exist.
all
All interfaces
clear test interface port1.0.1
clear test interface all
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
419