Service Password-Encryption - Allied Telesis AT-x510-28GTX Command Reference Manual

U A C
SER CCESS OMMANDS
-
SERVICE PASSWORD ENCRYPTION

service password-encryption

Overview Use this command to enable password encryption. This is enabled by default.
When password encryption is enabled, the device displays passwords in the
running config in encrypted form instead of in plain text.
Use the no service password-encryption command to stop the device from
displaying newly-entered passwords in encrypted form. This does not change the
display of existing passwords.
NOTE
user passwords only - not encrypted user passwords. Do not use option 8 for GUI users.
service password-encryption
Syntax
no service password-encryption
Mode Global Configuration
awplus#
Example
awplus(config)#
Validation show running-config
Commands
Related enable password
Commands
C613-50102-01 REV C
: Do not use encrypted passwords for GUI users. The GUI requires unencrypted
configure terminal
service password-encryption
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
179