Allied Telesis AT-x510-28GTX Command Reference Manual page 103

F C M
ILE AND ONFIGURATION ANAGEMENT
Similarly, you can specify the USB storage device base directory with usb or usb:
or usb:/
You cannot name a directory or subdirectory flash, nvs, usb, card, tftp, scp, sftp
or http. These keywords are reserved for tab completion when using various file
commands.
In a stacked environment you can only access flash and nvs using the stack
member filepath (e.g. dir awplus-2/flash:/). To access a USB storage
device on a backup stack member, use the
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50102-01 REV C
C
OMMANDS
"autoboot enable" on page 105
"boot config-file" on page 106
"boot config-file backup" on page 108
"boot system" on page 109
"boot system backup" on page 111
"cd" on page 112
"copy (filename)" on page 113
"copy current-software" on page 115
"copy debug" on page 116
"copy running-config" on page 117
"copy startup-config" on page 118
"copy zmodem" on page 119
"create autoboot" on page 120
"delete" on page 121
"delete debug" on page 122
"dir" on page 123
"edit" on page 125
"edit (filename)" on page 126
"erase startup-config" on page 127
"ip tftp source-interface" on page 128
"ipv6 tftp source-interface" on page 129
"mkdir" on page 130
"move" on page 131
"move debug" on page 132
"pwd" on page 133
"rmdir" on page 134
"show autoboot" on page 135
"show boot" on page 136
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
remote-login command.
103