Ospf Commands; Introduction - Allied Telesis AT-x510-28GTX Command Reference Manual

26

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
OSPF. For more information, see the
Guide.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50102-01 REV C

OSPF Commands

"area default-cost" on page 894
"area authentication" on page 895
"area filter-list" on page 896
"area nssa" on page 897
"area range" on page 899
"area stub" on page 901
"area virtual-link" on page 902
"auto-cost reference bandwidth" on page 905
"bandwidth" on page 907
"capability opaque" on page 908
"capability restart" on page 909
"clear ip ospf process" on page 910
"compatible rfc1583" on page 911
"debug ospf events" on page 912
"debug ospf ifsm" on page 913
"debug ospf lsa" on page 914
"debug ospf nfsm" on page 915
"debug ospf nsm" on page 916
"debug ospf packet" on page 917
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
OSPF Feature Overview and Configuration
891