Terminal Length - Allied Telesis AT-x510-28GTX Command Reference Manual

U A C
SER CCESS OMMANDS

TERMINAL LENGTH

terminal length
Overview Use the terminal length command to specify the number of rows of output that
the device will display before pausing, for the currently-active terminal only.
Use the terminal no length command to remove the length specified by this
command. The default length will apply unless you have changed the length for
some or all lines by using the
terminal length <length>
Syntax
terminal no length [<length>]
Mode User Exec and Privileged Exec
Examples The following example sets the number of lines to 15:
awplus#
The following example removes terminal length set previously:
awplus#
Related terminal resize
Commands
length (asyn)
C613-50102-01 REV C
Parameter Description
<length>
<0-512> Number of rows that the device will display on the
currently-active terminal before pausing.
terminal length 15
terminal no length
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
length (asyn) command.
189