Show Ipv6 Route Summary - Allied Telesis AT-x510-28GTX Command Reference Manual

IP 6 C
V OMMANDS
6
SHOW IPV ROUTE SUMMARY

show ipv6 route summary

Overview Use this command to display the summary of the current NSM RIB entries.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ipv6 route summary
Mode User Exec and Privileged Exec
Example To display IP route summary, use the following command:
awplus#
Output Figure 22-5: Example output from the show ipv6 route summary command
Related show ip route database
Commands
C613-50102-01 REV C
show ipv6 route summary
IPv6 routing table name is Default-IPv6-Routing-Table(0)
IPv6 routing table maximum-paths is 4
RouteSource Networks
connected 4
rip 5
Total 9
FIB 5
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
794