Allied Telesis AT-x510-28GTX Command Reference Manual page 392

I C
NTERFACE OMMANDS
( )
INTERFACE TO CONFIGURE
The following example shows how to enter Interface mode to configure the local
loopback interface.
awplus#
awplus(config)#
awplus(config-if)#
Related ip address (IP Addressing and Protocol)
Commands
show interface
show interface brief
C613-50102-01 REV C
configure terminal
interface lo
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
392