Allied Telesis AT-x510-28GTX Command Reference Manual page 765

Stackable gigabit edge switches
Hide thumbs Also See for AT-x510-28GTX:
Table of Contents

Advertisement

IP
6 C
V
OMMANDS
6
IPV
ADDRESS
To assign the IPv6 address 2001:0db8::a2/64 to the VLAN interface vlan2, use the
Examples
following commands:
awplus#
awplus(config)#
awplus(config-if)#
To remove the IPv6 address 2001:0db8::a2/64 from the VLAN interface vlan2, use
the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To assign the eui64 derived address in the prefix 2001:db8::/48 to VLAN
interface vlan2, use the following commands:
awplus#
awplus(config)#
awplus(config-fr-subif)#
To remove the eui64 derived address in the prefix 2001:db8::/48 from VLAN
interface vlan2, use the following commands:
awplus#
awplus(config)#
awplus(config-fr-subif)#
Related
ipv6 address autoconfig
Commands
show running-config
show ipv6 interface brief
show ipv6 route
C613-50102-01 REV C
configure terminal
interface vlan2
ipv6 address 2001:0db8::a2/64
configure terminal
interface vlan2
no ipv6 address 2001:0db8::a2/64
configure terminal
interface vlan2
configure terminal
interface vlan2
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ipv6 address 2001:0db8::/48 eui64
no ipv6 address 2001:0db8::/48 eui64
765

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents