Erase Startup-Config - Allied Telesis AT-x510-28GTX Command Reference Manual

F C M
ILE AND ONFIGURATION ANAGEMENT
-
ERASE STARTUP CONFIG

erase startup-config

Overview This command deletes the file that is set as the startup-config file, which is the
configuration file that the system runs when it boots up.
At the next restart, the device loads the default configuration file, default.cfg. If
default.cfg no longer exists, then the device loads with the factory default
configuration. This provides a mechanism for you to return the device to the
factory default settings.
erase startup-config
Syntax
Mode Privileged Exec
Example To delete the file currently set as the startup-config, use the command:
awplus#
Related boot config-file backup
Commands
copy running-config
copy startup-config
show boot
C613-50102-01 REV C
C
OMMANDS
erase startup-config
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
127