Allied Telesis AT-x510-28GTX Command Reference Manual page 661

P E C
OWER OVER THERNET OMMANDS
-
SHOW POWER INLINE
Table 1: Parameters in the show power-inline command output (cont.)
C613-50102-01 REV C
Parameter
Operational
Status
Power Usage
Threshold (%)
Interface
Admin
Pri
Oper
Power
Device
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
The operational status of the PSU hardware when this
command was issued:
• On if the PSU is installed and switched on.
• Off when the PSU is switched off (an RPS may be
connected to the switch to power PoE instead of the
PSU).
• Fault when there is an issue with the PSU hardware.
The configured SNMP trap / log threshold, as configured
from a power-inline usage-threshold
The PoE port(s) in the format portx.y.z, where x is the
device number, y is the module number within the device,
and z is the PoE port number within the module.
The administrative state of PoE on a PoE port, either
Enabled or Disabled.
The current PoE priorities for PoE ports, as configured from
a power-inline priority command:
• Low displays when the low parameter is issued. The
lowest priority for a PoE enabled port (default).
• High displays when the high parameter is issued. The
second highest priority for a PoE enabled port.
• Crit displays when the critical parameter is issued.
The highest priority for a PoE enabled port.
The current PoE port state when this command was issued:
• Powered displays when there is a PD connected and
power is being supplied.
• Disabled displays when supplying power would make
the switch go over the power budget.
• Off displays when PoE has been disabled for the PoE
port.
• F ault displays when a switch goes over its power
allocation.
The power consumption in milliwatts (mW) for the PoE
port when this command was entered.
The description of the connected PD device if a description
has been added with the
command. No description is shown for PDs not configured
with the power-inline description
command.
power-inline description
command.
661