Info-Center Format Unicom; Info-Center Logbuffer - H3C SR6600 Command Reference Manual

Usage guidelines
The device can output system information only after the information center is enabled.
Examples
# Enable the information center.
<Sysname> system-view
[Sysname] info-center enable
Info: Information center is enabled.

info-center format unicom

Use info-center format unicom to set the UNICOM format for system information sent to a log host.
Use undo info-center format to restore the default.
Syntax
info-center format unicom
undo info-center format
Default
The format for the system information sent to a log host is H3C.
Views
System view
Default command level
2: System level
Usage guidelines
System information can be sent to a log host in H3C or UNICOM format. For more information, see
Network Management and Monitoring Configuration Guide.
Examples
# Set the UNICOM format for system information sent to a log host.
<Sysname> system-view
[Sysname] info-center format unicom

info-center logbuffer

Use info-center logbuffer to configure information output to the log buffer.
Use undo info-center logbuffer to disable information output to the log buffer.
Syntax
info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ] *
undo info-center logbuffer [ channel | size ]
Default
The system outputs information to the log buffer through channel 4 (logbuffer) and the default buffer size
is 512.
214