Rear Seat Removal And Installation; Specifications; Special Tools And Equipment; Recommended Service Material - Suzuki Swift Sport 2004 Service & Repair Manual

9G-4 Seats:

Rear Seat Removal and Installation

Removal
1) Fold rear seat back forward.
2) Remove seat mounting bolts and nuts to remove seat assembly.
3) Disassemble and repair seat as necessary.
Installation
Reverse removal procedure to install rear seat.
• Tighten seat back striker mounting bolts according to "Rear Seat Components".
• Torque to specifications in "Rear Seat Components".
• When installing seat cushion, align seat cushion hook with center hinge bracket.
Tightening Torque Specifications
NOTE
The specified tightening torque is also described in the following.
"Front Seat Components"
"Rear Seat Components"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information in Section 0A".

Recommended Service Material

Material
Thread lock cement
NOTE
Required service material is also described in the following.
"Front Seat Components"

Specifications

Special Tools and Equipment

SUZUKI recommended product or Specification
Thread Lock Cement Super 1303B
Thread Lock Cement 1305
P/No.: 99000–32030
P/No.: 99000–32100
S7RS0B9706004
S7RS0B9707001
S7RS0B9708001
Note