Avaya Communication Manager Administrator's Manual page 590

Administering Media Servers
Note:
The client device for remote login must also be enabled and configured for SSH.
Note:
Refer to your client P.C. documentation for instructions on the proper commands
for SSH.
Enabling and disabling SSH or SFTP sessions on the CLAN or VAL circuit
packs
Prerequisites:
TN799BP (CLAN) with Release 3.0 firmware
●
VAL with Release 3.0 firmware
●
Communication Manager, Release 3.0 or later
●
To enable a secure FTP (SFTP) session on a CLAN or VAL circuit pack:
1. Type enable filexfr [board location]. Press Enter. The
screen displays.
Figure 212: Enable File Transfer screen
enable filexfer a03
2. Type a 3-6 alphabetic character login in the Login field.
3. Type a 7-11 character password (one character must be a number) in the first Password
field.
4. Retype the same password in the second Password field.
5. Type y in the Secure? field. Press Enter.
SFTP is enabled on the circuit pack, and the login/password are valid for 5 minutes.
To disable a secure FTP (SFTP) session on a CLAN or VAL circuit pack:
1. Type disable filexfr [board location]. Press Enter.
SFTP is disabled on the circuit pack.
590 Administrator Guide for Avaya Communication Manager
ENABLE FILE TRANSFER
Login:______
Password:___________
Password:___________
Secure?
Enable File Transfer
Page 1