Avaya Communication Manager Administrator's Manual page 761

For example, 01A0612 is in cabinet 01, carrier A, slot 06, and circuit number (port) 12.
Each attendant console requires a port on a digital line circuit pack. For reliability, the attendant
consoles should not be assigned to ports on the same digital line circuit pack. For example, if
three attendant consoles are to be provided, assign each console to a port on three different
digital line circuit pack, if possible. However, if required, all attendant consoles can be assigned
to ports on the same digital line circuit pack.
Security Code
Does not apply to S8700 Series IP-Connect. Enter the security code required by the
SoftConsole IP attendant. The required security code length is determined by Minimum
Security Code Length on the Feature-Related System Parameters screen.
TN
Valid entries
1 to 100
Type
Valid entries
console
302
DIRECT TRUNK GROUP SELECT BUTTON ASSIGNMENTS (Trunk Access
Codes)
Enter the trunk access codes (TACs) for local and remote servers. (There are fields for one local
TAC and one remote TAC per button labeled Local and Remote.) The local TAC (1 to 4 digits)
refers to a trunk group or Loudspeaker Paging zone on this server. Remote TACs are only
useful in a private network (including DCS) network. The remote TAC (1 to 3 digits) refers to a
trunk group on the remote server. If a remote TAC is given, then the local TAC must see a trunk
group that connects directly to the remote server running Avaya Communication Manager and
is also limited to 1 to 3 digits.
Usage
Enter the Tenant Partition number.
Usage
Indicates the type of attendant console being administered.
Use for 302B/C/D or SoftConsole IP attendant.
Attendant Console
Issue 2.1 May 2006 761