Avaya Communication Manager Administrator's Manual page 773

Valid entries
Attendant Room Status
occ-rooms
maid-stat
vu-display
If 12 HGS buttons are assigned on field descriptions for page 2, Avaya recommends that
●
the night, pos-busy, and hold buttons be reassigned to locations 20, 21, and 3,
respectively. The HGS buttons should then be assigned to the right-most three columns,
as required.
Field descriptions for page 4
Figure 303: Attendant Console screen
change attendant n
DISPLAY BUTTON ASSIGNMENTS
1: normal____
2: inspect___
3: cov-msg-rt
4: next______
DISPLAY MODULE BUTTON ASSIGNMENTS
Display-type buttons obtain display functions on the associated alphanumeric display. These
buttons are noted as [display button] in the Feature or Function column on the table. Also,
several feature buttons can be administered so that their associated status lamps can be used
to provide visual indications of the associated feature or function. In some cases, the button
itself is not operational. These buttons are noted as [status lamp]. If a Call Cover Msg Rt
Usage
Occupied rooms; allows the attendant to see which rooms are occupied.
Maid status; allows the attendant to see which rooms are in one of six
specified states.
VuStats (vu-display)
and attendants to turn on the VuStats display. The limit to the number of
VuStats feature buttons you can administer depends on how many
feature buttons are available on the attendant console you are
administering. The system is designed to allow you to set up a separate
VuStats display format for each feature button. Therefore, agents can
change the type of measurements on their display by selecting a
different VuStats feature button.
—
This button allows users with display telephones
ATTENDANT CONSOLE
5: delete-msg
6: call-disp_
7: date-time_
8: timer_____
Attendant Console
4 of 4
Page 4 of x
Issue 2.1 May 2006 773