Avaya Communication Manager Administrator's Manual page 137

Table 2: Telephone feature buttons (continued)
Button name Button label
busy-ind Busy
(TAC/Ext: __)
call-appr extension
call-disp Return Call
call-fwd Call
(Ext: ___) Forwarding
call-park Call Park
call-pkup Call Pickup
call-timer CTime
callr-info Caller Info
cas-backup CAS Backup
Description
Busy Indication: indicates the busy or
idle status of an extension, trunk
group, terminating extension group
(TEG), hunt group, or loudspeaker
paging zone. Users can press the
busy-ind button to dial the specified
extension.
You can assign this button to any lamp
button and must specify which Trunk
or extension the user wants to monitor.
Call Appearance: originates or
receives calls. Assign to a 2-lamp
appearance button.
Call Displayed Number (display
button): initiates a call to the currently
displayed number. The number can be
from a leave word calling message or
a number the user retrieved from the
Directory.
Activates or deactivates Call
Forwarding All Calls.
Allows the user to place the current
call in the call park state so it can be
retrieved from another telephone.
Allows the user to answer a call that is
ringing in the user's pickup group.
Used only on the 6400 sets. Allows
users to view the duration of the call
associated with the active call
appearance button.
(display button) Used with Call
Prompting to allow users to display
information collected from the
originator.
Centralized Attendant Service
Backup: used to redirect all CAS calls
to a backup extension in the local
branch if all RLTs are out-of-service or
maintenance busy. The associated
status lamp indicates if CAS is in the
backup mode.
Telephone Feature Buttons Table
Maximum
1 per TAC/
Ext
Depends
on station
type
1 per
station
64 per
extension
1 per
station
1 per
station
1 per
station
1 per
station
1 per
station
6 of 21
Issue 2.1 May 2006 137