Avaya Communication Manager Administrator's Manual page 801

Record Outgoing Calls Only
Valid entries
y
n
Remove # From Called Number
Valid entries
y
n
Secondary Output Endpoint
Appears when the Secondary Output Format field is administered.
Valid entries
eia
Extension
number
CDR1, CDR2
Usage
Enter y to record only outgoing calls. This can save space if you are only
concerned with charges for outbound calls.
Enter n to record both outgoing and incoming calls.
Usage
Enter y to have the "#" (or "E") symbol removed from the Dialed Number
field of the call detail record. You might need to verify that your output
device can accept this format.
Enter n to have the trailing "#" (or "E") symbol appear in the Dialed
Number field whenever inter-digit time out occurs or users dial # to
indicate the end of dialing.
Usage
Use this if the secondary output device is connected to the eia port.
This is the extension of the data module (if used) that links the secondary
output device to the server running Avaya Communication Manager.
Use this value if the CDR device is connected over a TCP/IP link, and this
link is defined as either CDR1 or CDR2 on the IP Services screen.
CDR System Parameters
Issue 2.1 May 2006 801