Avaya Communication Manager Administrator's Manual page 924

Screen Reference
Connect
In order to control communications at layers 2 and 3 of the ISDN-PRI protocol, use this field to
specify what is on the far end of this DS1 link. This field only appears when the Signaling Mode
field is isdn-pri.
Valid entries
pbx
line-side
network
host
Country Protocol
The entry in this field must match the country protocol used by the far-end server. For
connections to a public network, your network service provider can tell you which country
protocol they are using.
This field appears if the Signaling Mode field is CAS or isdn-pri. For the Japanese 2Mbit trunk
circuit pack, this is a display-only field if the Signaling Mode field is CAS.
Note:
For a list of country codes, see the
Note:
Valid entries
1 to 25
etsi
924 Administrator Guide for Avaya Communication Manager
Usage
Enter pbx if this DS1 link is connected to another switch in a private
network. If pbx is entered, the Interface field appears.
Enter line-side when Communication Manager is acting as the network
side of an ISDN-PRI interface. Use line-side to connect to Roll About
Video equipment.
Enter network when the DS1 link connects Communication Manager to a
central office or any other public network switch.
Enter host when the DS1 link connects Communication Manager to a
computer.
Usage
Enter the country protocol used by the central office at which this link
terminates.
Enter etsi if your network service provider uses the protocol of the
European Telecommunications Standards Institute (ETSI). Enter etsi only
if the Signaling Mode field is isdn-pri.
Country code table on page 1514.