Avaya Communication Manager Administrator's Manual page 200

Managing Displays
6. Load the Unicode message files. After you install the Unicode Message files, you must do a
reset 4 to load the Unicode Message files in the Avaya media server that is running
Communication Manager 2.0 or later. Starting with Communication Manager 2.1, a reset 4
is no longer required to load the Unicode Message file custom_unicode.txt.
Note:
Unicode display is only available for Unicode-supported telephones. Currently,
Note:
only the 4610SW, 4620SW, 4621SW, and 4622SW support Unicode display.
Unicode "Native Name" support
Communication Manager supports Unicode for the "Name" associated with Vector Directory
Numbers (VDNs), trunk groups, hunt groups, and stations. The Unicode Name (also referred to
as Native Name and Name 2) fields are hidden fields that are associated with the name fields
you administer on the respective screens for each. These fields can only be administered using
Avaya Site Administration (ASA) or MultiSite Administrator (MSA).
The Unicode VDN Name is associated with the name administered in the Name field on
●
the Vector Directory screen. You must use MSA.
The Unicode Trunk Group Name is associated with the name administered in the Group
●
Name field on the Trunk Group screen. You must use MSA.
The Unicode Hunt Group Name is associated with the name administered in the Group
●
Name field on the Hunt Group screen. You must use MSA.
The Unicode Station Name is associated with the name administered in the Name field on
●
the Station screen. You must use ASA or MSA.
Station General Status screen
The General Status screen for stations contains three Unicode script-related fields. To access
the General Status screen, type status station xxxx, where xxxx is the extension of the
station. The General Status screen appears. Click Next to display page 2 of the screen:
200 Administrator Guide for Avaya Communication Manager