Avaya Communication Manager Administrator's Manual page 231

Figure 84: Console Parameters screen
change console-parameters
Calls in Queue Warning: 5
Attendant Vectoring VDN:
5. In the DID-LDN Only to LDN Night Extension field, type n.
6. Press Enter to save your changes.
After you set up night station service, have the attendant use the night console button to
activate and deactivate night service.
Setting up trunk answer from any station
There might be situations where you want everyone to be able to answer calls when the
attendant is away. Use trunk answer any station (TAAS) to configure the system so that it
notifies everyone when calls are ringing. Then, you can give users the trunk answer any station
feature access code so they can answer these calls.
When the system is in night service mode, attendant calls redirect to an alerting device such as
a bell or a buzzer. This lets other people in the office know when they should answer the
telephone.
Note:
If no one answers the call, the call will not redirect to night service.
Note:
We will define a feature access code (we'll use 71) and configure the alerting device for trunk
answer any station.
You need a ringing device and 1 port on an analog line circuit pack. See the Hardware
Description and Reference for Avaya Communication Manager, 555-245-207, for more
information on the circuit pack.
Attendant Group Name: OPERATOR
COS: 0
Ext Alert Port (TAAS):
CAS: none
IAS (Branch)? n
IAS Att. Access Code:
Backup Alerting? n
CONSOLE PARAMETERS
Night Service Act. Ext.:
IAS Tie Trunk Group No.:
Alternate FRL Station:
DID-LDN Only to LDN Night Ext? n
Setting up Night Service
Page 1 of x
COR: 0
Attendant Lockout? y
Issue 2.1 May 2006 231