Avaya Communication Manager Administrator's Manual page 772

Screen Reference
Valid entries
vis
Trunk Group Select
Assignments on Field descriptions for page 1, up to 12 single lamp DTGS buttons can be
administered on this page. The status lamp associated with the feature button is used to
monitor the busy/idle status of the trunk. Trunk groups administered on these buttons cannot
be controlled using Attendant Control of Trunk Group Select buttons. The single lamp
DTGS buttons can be administered as follows:
local-tgs
remote-tgs
hundrd-sel
group-disp
group-sel
772 Administrator Guide for Avaya Communication Manager
Usage
Visually Impaired Attendant Service (vis)
visually impaired service for the attendant. When this service is
activated, the attendant can listen to console status or messages by
pressing buttons that have been translated as follows:
"con-stat" repeats the console status.
●
"display" calls out display contents.
●
"dtgs-stat" calls out the DTGS status.
●
"last-mess" repeats the last message.
●
"last-op" calls out the last operation.
●
—
In addition to the 12 Direct Trunk Group Selection (DTGS) Button
Local trunk group select; allows the attendant to access trunk groups on
the local server running Avaya Communication Manager (combination of
12 local-tgs/remote-tgs per console).
Remote trunk group select; allows the attendant to access trunk groups
on a remote server running Avaya Communication Manager
(combination of 12 local-tgs/remote-tgs per console).
Hundreds group select; in addition to the fixed HGS buttons on Field
descriptions for page 1, a user can administer hundreds group select
feature buttons on this page. When a feature button is administered as
"hundrd-sel," a subfield appears that must then be administered in the
same manner as the fixed HGS button fields (a 1 to 3 digit hundreds
group plus prefix, if needed). Administered hundrd-sel feature buttons
operate in the same manner as fixed HGS buttons.
The total number of hundreds group select buttons (fixed and
administered) allowed on a console is 20. Thus, if all 20 fixed HGS
buttons have been administered, no hundrd-sel feature buttons can be
administered.
Note: If no fixed HGS buttons are administered, 19 hundrd-sel feature
buttons are available. This is because 5 of the 24 feature buttons must
be used for required feature buttons (hold, pos-busy, night-serv,
forced-rel, and split)
Group Display. Allows the attendant to see a display of extensions
currently being tracked on the DXS module.
Group Select. Allows the attendant to select a specific group of hundreds
by dialing the first 2 or 3 digits of the hundreds group.
—
This button activates
3 of 4