Avaya Communication Manager Administrator's Manual page 457

Figure 184: Station screen
add station nnnn
SITE DATA
Room: _______
Jack: ___
Cable: ___
Floor: _______
Building: _______
ABBREVIATED DIALING
List1: ________
BUTTON ASSIGNMENTS
1: call-appr
2: call-appr
3: call-appr
4: audix-rec
15. In the Button Assignments section, type one of the following:
asvn-halt — The Authorization Code Security Violation Notification call is activated when
●
an authorization code security violation is detected. This applies only if you are using
authorization codes.
lsvn-halt — The Login Security Violation Notification call is activated a referral call when
●
a login security violation is detected.
rsvn-halt — The Remote Access Barrier Code Security Violation Notification call is
●
activated as a call referral. This applies only if you are using Remote Access barrier
codes.
ssvn-halt — The Station Code Security Violation Notification call is activated when a
●
station code security violation is detected. This applies only if you are using station
codes.
Note:
Any of the above 4 security violations will cause the system to place a notification
Note:
call to the designated telephone. The call continues to ring until answered. To
stop notification of any further violations, press the button associated with the
type of violation.
16. Press Enter to save your changes.
List2: _________
5:
6:
7:
Ext: 4000 8:
Setting up Security Violations Notification
STATION
Page 3 of X
Headset? n
Speaker? n
Mounting: d
Cord Length: 0_
Set Color: _____
List3: _________
Issue 2.1 May 2006 457