Avaya Communication Manager Administrator's Manual page 741

Messaging Server Name for Messaging
Do one of the following actions:
Enter the name of the Messaging Server used for LWC Reception.
●
Enter the name of the Messaging Server that provides coverage for this Agent LoginID.
●
Leave blank (default).
●
MIA Across Skills
Enter y to remove an agent from the MIA queues for all the splits or skills that the agent is
available in when the agent answers a call from any of the assigned splits or skills. Enter n to
exclude ACW agents for the queue.Valid entries are system (default), n, and y. The system
value indicates that settings assigned on the Feature Related System Parameters screen
apply.
Name
Enter up to a 27-character string naming the agent. Any alpha-numeric character is valid.
Default is blank.
Note:
The Name field is supported by Unicode language display for the 4610SW,
Note:
4620SW, 4621SW, and 4622SW telephones. For more information on Unicode
language display, see
Avaya BRI stations support ASCII characters only. They do not support
non-ASCII characters, such as Eurofont or Kanafont. Therefore, if you use
non-ASCII characters in any Communication Manager Name field, such
characters will not display correctly on a BRI station.
Password
Appears only if both the AAS and AUDIX fields are n. Enter up to nine digits as the password
the Agent must enter upon login. Valid entries are the digits 0 through 9. Enter the minimum
number of digits in this field specified by the Minimum Agent-LoginID Password Length field
on the Feature-Related System Parameters screen. Default is blank. Values entered in this
field are not displayed on the screen.
Password (enter again)
Appears only if both the AAS and AUDIX fields are n. Reenter the same password exactly as it
was entered in the Password field. Default is blank. Values entered in this field are not
displayed on the screen.
Administering Unicode display
Agent LoginID
on page 199.
Issue 2.1 May 2006 741