Avaya Communication Manager Administrator's Manual page 386

Managing MultiMedia Calling
mm-multinbr button/FAC provides information on originating a 2B call where the
destination has a different address for each B-channel.
Note:
The mm-call feature access code is generally used by stations that are part of an
Note:
Enhanced multimedia complex, but can be used by any station to originate a
multimedia call.
3. mm-multinbr (Multimedia Multi-number) button. The mm-multinbr button is similar to
the mm-call button. It allows origination of a multimedia call from a voice station. It is used
when the destination being dialed requires a different address for each of the 2 B-channels.
An example of this is Central Office provided ISDN-BRI. This type of BRI line is provisioned
with separate listed directory numbers for each B-channel. In order to make a 2B
multimedia call to such a device, two sets of addresses must be entered.
The user goes off-hook and selects the mm-multinbr button. The user can select the
mm-multinbr button and then go off-hook. If the user has a speakerphone on the station,
the user can originate the call simply by selecting the mm-multinbr button. The
speakerphone will automatically be placed off-hook and dialtone will be heard. Upon
selection of the mm-multinbr button, the mm-multinbr and mm-call (if present) status
lamp (green led) should become solid. The user now dials the first destination address
digits. The destination address can be provided by dialing digits, using abbreviated dial
entries, last number dialed, etc. The system will provide dialtone after the first address has
been completed. The user now dials the second destination address digits. The destination
address can be provided by dialing digits, using abbreviated dial entries, last number dialed,
etc. After the second address has been collected, the mm-multinbr status lamp will go off.
Originating a multimedia call with the mm-multinbr button will originate a call according to
the Default Multimedia Parameters selected on the System Parameters Features screen.
This default parameter will be either 2x56 or 2x64. The bearer capability of the multimedia
calls will either be 56K or 64K and the bandwidth will be 2B channels.
Note:
The mm-multinbr feature button is generally used by stations that are part of an
Note:
Enhanced multimedia complex, but can be used by any station to originate a dual
address multimedia call.
4. Multimedia Multi-number Call feature access code. For stations that do not have an
administered mm-multinbr button, the Multimedia Multi-number call feature access code
can be used instead. It allows origination of a multimedia call from a voice station. It is used
when the destination being dialed requires a different address for each of the 2 B-channels.
An example of this is Central Office provided ISDN-BRI. This type of BRI line is provisioned
with separate listed directory numbers for each B-channel. In order to make a 2B
multimedia call to such a device, two sets of addresses must be entered.
The user goes off-hook and dials the MM-multinbr feature access code. Upon dialing of the
MM-multinbr FAC, the mm-call (if present) status lamp (green led) should become solid.
The user now dials the first destination address digits. The destination address can be
provided by dialing digits, using abbreviated dial entries, last number dialed, etc. The
system will provide dialtone after the first address has been completed. The user now dials
386 Administrator Guide for Avaya Communication Manager