Avaya Communication Manager Administrator's Manual page 625

Testing SNMP Traps
Use the SNMP Test page to send a test trap to the configured SNMP trap receiver(s).
To send a test trap:
1. Under the Alarms section of the Maintenance Web Pages home page, click SNMP Test.
The system displays the SNMP Test page.
Figure 236: SNMP Test page
2. Click the Generate Test Trap button to send a test trap.
3. Check the configured SNMP trap receiver(s) to ensure receipt of the test trap.
Administering SNMP Agents
Issue 2.1 May 2006 625