Avaya Communication Manager Administrator's Manual page 406

Setting Up Telecommuting
When a call that goes to coverage from a PSA-disassociated extension, Avaya Communication
Manager sends a message to the coverage point indicating that the call was not answered. If
the coverage point is a display telephone, the display shows "da" for "don't answer." If the
coverage point is a voice-messaging system, the messaging system receives an indication from
Communication Manager that this call was not answered, and treats the call accordingly.
Note:
Once a telephone has been associated with an extension, anyone using the
Note:
terminal has the capabilities of the associated station. Be sure to execute a
dissociate request if the terminal can be accessed by unauthorized users. This is
particularly important if you use PSA and DCP extenders to permit remote DCP
access.
Before you start
Verify that the Personal Station Access field is set to y on the
Verify that the extension has a COS that allows PSA.
Instructions
In our example, we specify the TTI State, the Record PSA/TTI Transactions, the class of
service, and the feature access codes set up for PSA.
To set up Personal Station Access:
1. Type change system-parameters features. Press Enter.
The Feature-Related System Parameters
2. Complete the following fields. Press Enter.
a. Type voice in the TTI State field.
b. (Optional) Type y in the Record CTA/PSA/TTI Transactions in History Log field.
These fields display only when the Terminal Translation Initialization (TTI) Enabled
field on this screen is set to y.
3. Type change cos. Press Enter.
The Class of Service
4. Type y in the Personal Station Access (PSA) 1 field. Press Enter.
5. Type change feature-access-codes. Press Enter.
The Feature Access Code screen appears.
406 Administrator Guide for Avaya Communication Manager
screen appears.
screen appears.
Class of Service screen.