Avaya Communication Manager Administrator's Manual page 1070

Screen Reference
PMS LINK PARAMETERS
ASCII mode
The PMS Protocol Mode field must be transparent.
Valid entries
y/n
Milliseconds Before PMS Link Acknowledgment Timeout
This regulates how quickly the system responds to a message from the PMS (also known as
"pace timing"). This value is also used as the "inquiry message" (ENQ) time-out value. In most
cases, keep this as short as possible.
Valid entries
100 to 1500
PMS Link Maximum Retransmission Requests
Valid entries
1 to 5
PMS Link Maximum Retransmissions
Valid entries
1 to 5
1070 Administrator Guide for Avaya Communication Manager
Usage
Enter y when the ASCII-only mode is being used for the PMS message
set.
Usage
Enter the time in milliseconds the system waits for an acknowledgment
from the PMS indicating it correctly received a message.
Usage
Enter the number of times that the server will allow the PMS to request
acknowledgment for a message that it sent.
Usage
Enter the number of times that the server retransmits a message to the
PMS in response to a negative acknowledgment, or sends an inquiry for
acknowledgment from the PMS before giving up on the message.