Chapter 14: Managing Group Communications; Setting Up Voice Paging Over Loudspeakers - Avaya Communication Manager Administrator's Manual

Chapter 14: Managing Group Communications

Setting up Voice Paging Over Loudspeakers

Use this procedure to allow users to make voice pages over an external loudspeaker system
connected to Avaya Communication Manager. If you're using an external paging system instead
of an auxiliary trunk circuit pack, don't use this procedure. External systems typically connect to
a trunk or station port and are not administered through the Loudspeaker Paging screen.
Before you start
Your server running Communication Manager must have one or more auxiliary trunk circuit
packs with enough available ports to support the number of paging zones you define. Each
paging zone requires 1 port. For information on specific circuit packs, see the Hardware
Description and Reference for Avaya Communication Manager, 555-245-207.
Instructions
As an example, we will set up voice paging for an office with 5 zones. We'll allow users to page
all 5 zones at once, and we'll assign a class of restriction of 1 to all zones.
1. Type change paging loudspeaker. Press Enter.
The Loudspeaker Paging screen appears.
Issue 2.1 May 2006 497