Avaya Communication Manager Administrator's Manual page 159

2. If you want to use a new telephone for the bridged-to extension, duplicate a station.
For information, see
3. Type change station and the bridged-to extension. Press Enter.
4. Press Next Page until the Feature Options page of the
5. For the Per Button Ring Control field (digital sets only):
If you want to assign ringing separately to each bridged appearance, type y.
●
If you want all bridged appearances to either ring or not ring, leave the default n.
●
Figure 48: Station screen
change station nnnn
FEATURE OPTIONS
LWC Reception? spe
LWC Activation? y
LWC Log External Calls? n
CDR Privacy? n
Redirect Notification? y
Per Button Ring Control? n
Bridged Call Alerting? n
Active Station Ringing: single
H.320 Conversion? n
Service Link Mode: as-needed
Multimedia Mode: basic
MWI Served User Type: ______
Automatic Moves:
Recall Rotary Digit? n
Remote Softphone Emergency Calls:
Emergency Location Ext: 75001
Precedence Call Waiting? y
6. Move to Bridge Call Alerting.
If you want the bridged appearance to ring when a call arrives at the primary telephone,
type y. Otherwise, leave the default n.
Using Templates to Add Telephones
AUDIX Name:
_
Setting up Bridged Call Appearances
on page 87.
Station screen
STATION
Auto Select Any Idle Appearance? n
Coverage Msg Retrieval? y
Idle Appearance Preference? n
Bridged Idle Line Preference? y
Restrict Last Appearance? y
Conf/Trans On Primary Appearance? n
Per Station CPN - Send Calling Number? _
Busy Auto Callback without Flash? y
Display Client Redirection? n
Select Last Used Appearance? n
Coverage After Forwarding? _
Multimedia Early Answer? n
Direct IP-IP Audio Connections? n
Always use? n IP Audio Hairpinning? n
appears.
Page 2 of X
Auto Answer:
Data Restriction? n
Issue 2.1 May 2006 159