Avaya Communication Manager Administrator's Manual page 121

2. Administer the TFTP server node name and the local node name (CLAN) and IP address.
3. Press Enter to save your changes.
4. Type change ip-interfaces. Press Enter.
The IP Interfaces screen appears.
5. Administer the CLAN Ethernet interface or processor CLAN.
6. Press Enter to save your changes.
Downloading the firmware file to Communication Manager
1. Place the file on the TFTP server using TFTP, FTP, HTTP or another file transfer program.
2. From the Web Interface menu, click the Set LAN Security link.
3. Click Advanced. A list of settings that can be enabled or disabled through the use of check
boxes appears.
4. Scroll to tftp and check the box enabling inbound tftp traffic.
5. Click Submit.
6. Log into SAT and enter change tftp-server. Press Enter.
The TFTP Server Configuration screen appears.
Figure 39: TFTP Server Configuration screen
change tftp-server
Local Node Name:
TFTP Server Node Name:
TFTP Server Port: 69
File to Retrieve:
File Status:
File Size:
Filename in Memory:
7. In the Local Node Name field, enter the valid local node name from the IP Node Names
screen.
The node must be assigned to a CLAN ip-interface or procr (processor CLAN).
8. In the TFTP Server Node Name field, enter the valid TFTP server node name from the IP
Nodes Names screen.
9. In the TFTP Server Port field, enter the TFTP server port number from where the file
download begins.
TFTP Server Configuration
Setting up Remote Office
Page 1 of 1
Issue 2.1 May 2006 121