Avaya Communication Manager Administrator's Manual page 973

AAR/ARS Dial Tone Required
A second dial tone provides feedback to the user that additional dialing can occur.
Valid entries
y/n
Abbreviated Dial Programming by Assigned Lists
Valid entries
y
n
ACA Referral Calls
Indicates where ACA referral calls generate. This field only appears when the Automatic
Circuit Assurance (ACA) Enabled field is y.)
Valid entries
local
primary
remote
Usage
Enter y to indicate a second dial tone is to be given to the calling party on a
incoming tie or DID trunk call that is to be routed via AAR/ARS.
Usage
Enter y to allow programming by station's assigned list.
Enter n if using Program Access code to indicate which personal list is to be
programmed.
Usage
Local referral calls generate on and for the local switch.
Primary referral calls generate on the local switch for remote servers/
switches as well as the local switch.
Remote referral calls generate at another server in a DCS network. In this
case, the remote node number must also be entered. The remote node
number is the same node number as defined on the Dial Plan screen.
Also, ACA button status transmits to other servers/switches when in a DCS
network.
Feature-Related System Parameters
Issue 2.1 May 2006 973