Avaya Communication Manager Administrator's Manual page 866

Screen Reference
Pause (msec)
The length of time between DTMF tones for each digit. Displays when the Alert Pager field is y.
Valid entries
20 to 2550
Pin Number
This field can be used for any combination of the pager pin number and pauses or left blank.
Displays when the Alert Pager field is y.
Valid entries
digits 0 to 9
p(ause)
#(pound)
*(star)
Retries
Displays when the Alert Pager field is y.
Valid entries
0 to 10
Retry Interval (sec)
Displays when the Alert Pager field is y. This field is not used unless the Retries field is 1 to 10.
Valid entries
30 to 60
866 Administrator Guide for Avaya Communication Manager
Usage
Enter a number in increments of 10.
Usage
Enter a number up to 15 digits. A pause (about 2 seconds) is for timing of
the message. For instance, after the pin number you might want to have a
pause to allow time for the pager service to set up the correct pager
message box. If the pager service requires you to submit a PIN number,
enter it here.
Usage
The number of times the system tries to send out the alert message in
case of an unsuccessful attempt. This increases the chances that the
pager receives a crisis alert message.
Usage
The administrable time period (in seconds) between retries. If an attempt
to call the pager fails, the retry call attempts after the retry interval period.