Avaya Communication Manager Administrator's Manual page 310

Routing Outgoing Calls
Instructions
To enable 1-800 calls for partition group 2:
1. Type list ars route-chosen 18002221000. Press Enter.
You can use any 7-digit number following the 1800 to create an example of the dialed string.
The ARS Route Chosen Report screen for partition group 1 appears.
Figure 126: ARS Route Chosen Report screen
ARS ROUTE CHOSEN REPORT
Location :
1800___________________
2. Record the route pattern for the selected dialed string.
In our example, the route pattern for 1800 is p1. This indicates that the system uses the
Partition Routing Table to determine which route pattern to use for each partition.
Note:
If there was a number (with no p) under Route Pattern on the Route Chosen
Note:
Report, then all partitions use the same route pattern. You need to use the
Partition Routing Table only if you want to use different route patterns for different
partition groups.
3. Press Cancel to return to the command prompt.
4. Type change partition-route-table index 1. Press Enter.
The Partition Routing Table
1800 calls and these calls use route pattern 30.
310 Administrator Guide for Avaya Communication Manager
1
Dialed Total
String Min
11 11
screen appears. In our example, partition group 1 can make
Partitioned Group Number: 1
Route Call
Max Pattern Type
p1___ fnpa
Node Location
Number
_____ all