Avaya Communication Manager Administrator's Manual page 962

Screen Reference
Terminal Dial-Up Test Access Code
Used to perform tests on digital telephones to make sure that the telephone and the buttons are
communicating properly with the server running Avaya Communication Manager. To use a
Terminal Dial-up Test FAC on a telephone with bridged appearances, add a
bridged-appearance of the principal telephone. See your maintenance documentation for
information about the Digital Terminal Remote Looparound Test.
Field descriptions for page 4
Figure 358: Feature Access Code (FAC) screen
change feature-access-codes
Terminal Translation Initialization Merge Code:
Voice Coverage Message Retrieval Access Code:
Voice Principal Message Retrieval Access Code: *80
Terminal Translation Initialization Merge Code
Enter the digits that must be dialed to install (merge) a station without losing any of its previous
feature settings. The Terminal Translation Initialization Separation Code must have been used,
or an X administered in the Port field of the Station screen, when the telephone was removed
from its former location in order for the Terminal Translation Initialization Merge Code to be
effective. (If you try to use this and it doesn't work, check the Station screen for this extension.
If there is still a port assigned, type X in the Port field, then try the TTI merge again.)
Terminal Translation Initialization Separation Code
Enter the digits that must be dialed to remove (separate) a station from a location without losing
any of its feature settings.
962 Administrator Guide for Avaya Communication Manager
FEATURE ACCESS CODE (FAC)
Transfer to Voice Mail Access Code:
Trunk Answer Any Station Access Code:
User Control Restrict Activation:
Whisper Page Activation Access Code:
Page 4 of x
Separation Code:
Deactivation: