Avaya Communication Manager Administrator's Manual page 1007

Unanswered DID Call Timer (seconds)
Enter number or blank to limit how long a DID call can remain unanswered before routing to the
DID/TIE/ISDN Intercept Treatment feature. This timer interacts with the nonadministrable 50
second Wait for Answer Supervision Timer (WAST). The WAST timer overrides this field. Thus if
this field is set to a value equal to or greater than 50 seconds, the caller receives intercept tone
instead of the normal attendant or announcement treatment that is given when the Unanswered
DID Call Timer expires before the WAST. If the Unanswered DID Call Timer expires while the
DID call is being processed by call vectoring, the timer is ignored. See
Timer in this section.
Valid entries
A number
between 10 and
1024
blank
Use Trunk COR for Outgoing Trunk Disconnect
Use this field to indicate whether the Outgoing Trunk Disconnect Timer is set based on the COR
of the originating station or of the trunk group. If enabled, the timer is based on the COR of the
trunk, not the originating caller's station.
Valid entries
n
y
DISTINCTIVE AUDIBLE ALERTING
Attendant Originated Calls
Valid entries
internal
external
priority
Usage
Enter a number to indicate how long a DID call can remain unanswered
before routing to the DID/TIE/ISDN Intercept Treatment feature.
Disables the timer.
Usage
Default. The Outgoing Trunk Disconnect Timer to be set based on the
COR of the originating station. This is the default.
Enter y to enable the Outgoing Trunk Disconnect Timer to be set based
on the COR of the trunk instead of the originating station.
Usage
Indicates which type of ringing (defined above) applies to
attendant-originated calls. Default is external.
Feature-Related System Parameters
Wait Answer Supervision
Issue 2.1 May 2006 1007