Avaya Communication Manager Administrator's Manual page 753

QLen (Queue Length)
The queue length is the number of calls that can queue for this announcement. The maximum
number of queues allowed depends on your system configuration.
The QLen field applies if the Q field is y and the Type field is analog, ds1 or aux-trunk. When
the Type field is integrated or integ-rep, N/A appears in this field. Integrated announcements
have a pre-set queue length
.
Valid entries
The maximum number
your system allows
Rt
Enter the recording rate speed (in 1000 bits/second) for TN750 or ISSPA integrated
announcements. A different recording speed can be used for each integrated announcement.
With VAL type sources, the default is 64 and cannot be changed. When the Type field is
analog, ds1 or aux-trunk, N/A appears in this field.
Valid entries
16
32
64
TN
Valid entries
1 to 100
Usage
Number of calls that can be queued for this announcement
Usage
16 kbps (8 minutes and 32 seconds of announcement time per circuit
pack or 1 hour and 24 minutes for 10 circuit packs for the TN750; for the
ISSPA, there are 240 minutes of storage time). This rate does not provide
a high-quality recording. Avaya does not recommend this for customer
announcements, but it is adequate for VDN of Origin announcements.
32 kbps (4 minutes and 16 seconds of total announcement time for the
TN750; for the ISSPA, there are 120 minutes of storage time).
64 kbps (for 2 minutes and 8 seconds of announcement time per circuit
pack or 42 minutes for 10 circuit packs for the TN750; for the ISSPA, there
are 60 minutes of storage time). This is the default for VAL.
Usage
Enter the Tenant Partition number, if any.
Announcements/Audio Sources
Issue 2.1 May 2006 753