Avaya Communication Manager Administrator's Manual page 510

Managing Group Communications
Figure 195: Intercom Group screen
change intercom-group n
GROUP MEMBER ASSIGNMENTS
2. Type 1 in the Length of Dial Code field.
Dial codes can be 1 or 2 digits long.
3. On row 1, type 2010 in the Ext field.
4. On row 1, type 1 in the DC field.
This is the code a user will dial to make an intercom call to extension 2010. The length of
this code must exactly match the entry in the Length of Dial Code field.
5. Repeat steps 3 and 4 for the remaining extensions.
Dial codes don't have to be in order. Communication Manager fills in the Name field with the
name from the Station screen when you save changes.
6. Press Enter to save your changes.
To allow users to make intercom calls, you must administer feature buttons on the telephones in
the intercom group. You can administer buttons for dial intercom, automatic intercom, or both on
multi-appearance telephones. You can't administer either intercom feature on single-line
telephones, but you can assign single-line telephones to intercom groups so those users can
receive intercom calls.
As an example, we will set up automatic intercom between extensions 2010 (dial code = 1) and
2011 (dial code = 2) in intercom group 1.
510 Administrator Guide for Avaya Communication Manager
Ext DC Name
1: ________ __
2: ________ __
3: ________ __
4: ________ __
5: ________ __
6: ________ __
7: ________ __
8: ________ __
9: ________ __
10: ________ __
11: ________ __
12: ________ __
13: ________ __
14: ________ __
15: ________ __
16: ________ __
INTERCOM GROUP
Group Number: n
Length of Dial Code: _
Page 1 of x