Avaya Communication Manager Administrator's Manual page 1076

Screen Reference
Note:
The PMS interface supports 3-, 4-, or 5-digit extensions, but prefixed extensions
Note:
do not send the entire number across the interface. Only the assigned extension
number is sent. Therefore, you should not use prefixed extensions for numbers
that are also going to use the Digit to Insert/Delete function.
Valid entries
0 to 9
Display Room Information in Call Display
This indicates the type of guest room information displayed on telephone displays.
Valid entries
y
n
Dual Wakeup
Valid entries
y/n
Extension to Receive Failed Wakeup LWC Messages
This indicates where unsuccessful wakeup LWC messages will be stored. This is usually
administered to an unassigned extension (cannot be a VDN extension) or to the attendant
(attd). In addition, a LWC lamp for that extension is usually assigned to the attendant console as
an indication of failed wakeup calls.
Valid entries
Unassigned
extension
1076 Administrator Guide for Avaya Communication Manager
Usage
Enter the leading digit that can be deleted and inserted back as described
in the following text.
Usage
If this field is set to y, the telephones will display the name and room
number. The extension number and room number are not always the
same number.
If this field is set to n, the telephones will display the name and extension
number.
Usage
Enter y if each extension can request two wakeup calls within one
24-hour time period.
Usage
Enter the extension where unsuccessful wakeup LWC messages will be
stored.