Avaya Communication Manager Administrator's Manual page 106

Managing Telephones
Figure 29: Station screen
add station next
Extension:
Type:
Port:
Name:
STATION OPTIONS
Survivable GK Node Name:
Survivable Trunk Dest?
Note that you choose to change an existing DCP extension by using change station
nnnn in this step, where nnnn is the existing DCP extension.
2. In the Type field, enter the model of telephone you want to use, such as 6408D.
3. In the Port field, type x for virtual telephone or enter the port number if there is hardware.
Note:
Port 1720 is turned off by default to minimize denial of service situations. This
Note:
applies to all IP softphones release 5.2 or later. You can change this setting, if
you have root privileges on the system, by typing the command: /opt/ecs/
sbin ACL 1720 on or off.
4. In the Security Code field, enter the password for this remote user, such as 1234321.
This password can be 3-8 digits in length.
5. In the Media Complex Ext field, type 3000.
This is the H.323 extension just administered.
6. In the IP Softphone field, type y.
7. On page 2, in the Service Link Mode field, type as-needed.
Set this field to permanent only for extremely busy remote telephone users, such as call
center agents.
106 Administrator Guide for Avaya Communication Manager
Loss Group: 2
Data Module? n
Speakerphone: 2-way
Display Language? English
Model:
Survivable COR:
STATION
Lock Messages? n
Security Code:
Coverage Path 1:
Coverage Path 2:
Hunt-to Station:
Personalized Ringing Pattern: 3
Page 1 of X
BCC: 0
TN: 1
COR: 1
COS: 1
Message Lamp Ext: 1014
Mute button enabled? y
Expansion Module?
Media Complex Ext:
IP Softphone? y
Remote Office Phone? y
IP Video Softphone?
IP Video?