Avaya Communication Manager Administrator's Manual page 341

Step 10 — Administer features
AAR/ARS
1. AAR/ARS is an optional feature on Avaya Communication Manager, and you need to
purchase this option to use it with MMCX. To verify that this feature is enabled, use the
command display system-parameters customer-options. If it is not enabled,
contact your Avaya representative.
2. The MMCX dial plan must use the same feature access codes as Avaya Communication
Manager. If this is not already the case, modify the MMCX dial plan using the chgdp
command. See your MMCX documentation for more information.
3. Include this feature access code in the chgmasi command.
CDR
1. To get call detail records for calls over MMCX interfaces, set CDR Reports = y on the MASI
Trunk Group screen.
2. To get call records for calls over the ISDN-PRI trunk group, set CDR Reports = y on the
ISDN-PRI Trunk Group screen.
3. To track calls between a MASI terminal and other MASI terminals or Communication
Manager stations, enter the MASI terminal extension on the intra-switch CDR screen.
4. Enter n in the Record Non-Call Assoc TSC field on the CDR System Parameters screen.
Note:
If you use the same PRI trunks for MASI and non-MASI calls, Avaya strongly
Note:
recommends that you do not enable CDR for these calls. Establish a separate
trunk group for non-MASI calls and set CDR Reports = n.
Coverage
To establish coverage from a MASI terminal to AUDIX:
1. Use the MMCX user interface to enter the AUDIX hunt group extension as the coverage
point. You cannot use Avaya Communication Manager coverage administration for MASI
terminals.
2. If AUDIX ports are not administered in Avaya Communication Manager, you must
administer them.
3. Set up the MASI terminal as an AUDIX subscriber. Enter the MASI terminal extension in the
Extension field on the Subscriber Administration screen.
To establish coverage from a MASI terminal to another MMCX terminal or Avaya
Communication Manager station:
1. Use the MMCX user interface to enter the desired extension as the coverage point for the
MASI terminal. You cannot use Avaya Communication Manager coverage administration for
MASI terminals.
Multimedia Applications Server Interface
Issue 2.1 May 2006 341